12-Mar-04_EmailBanner

Automation_Solution

 
Career
TDS_Banner_Beckhoff_Embedded-PC_CX8000


CX8000: PC Control redefines small controllers

Powerful 32 bit controller with integrated fieldbus and I/O interface.

Beckhoff CX8000 Embedded PC series contains a 32 bit controller with integrated fieldbus slave and can be applied universally in PLC applications. The CX8000 is currently the “smallest” PC-based controller from Beckhoff – as a result, PC Control is extending its reach into the lower categories of control. Either Bus Terminal (K-bus) or EtherCAT Terminal (E-bus) I/O systems can be directly mounted alongside the CX8000 CPU. The use of EtherCAT Terminals gives rise to further flexibility, e.g. the implementation of various topologies, the integration of lower level bus systems or simple connection to IP 67 rated I/O outside of electrical cabinets.

Feature:

  • 32 bits controller with integrated fieldbus slave
  • Applicable universally in all PLC applications
  • Smallest PC-based controller from Beckhoff
  • Bus Terminal (K-bus) or EtherCAT Terminal (E-bus) I/O systems can be directly mounted alongside CX8000 CPU.

TDS_ADV_Beckhoff_CX8000_2

Description:

Within the Beckhoff controller categories, the CX8000 is positioned between the 16 bit Embedded Controllers and the CX9010 Embedded PC. The CX8000 series Embedded PCs with 400 MHz ARM CPU and microSD card as storage medium are best suited for distributed intelligence. Connection to the higher-level master controller takes place via an integrated fieldbus slave. To this end, the CX8000 series includes six versions with interfaces for PROFIBUS, CANopen, PROFINET, EtherNet/IP, EtherCAT and Ethernet. Programming and commissioning or connection to the Ethernet network takes place via an additional Ethernet interface. Programming can also be performed via the fieldbus interface. The Embedded PC versions for PROFINET, EtherNet/IP, EtherCAT and Ethernet feature additional Ethernet interfaces with switch functions so a linear “daisy chain” topology can be established without additional hardware, which helps cut costs.

Microsoft Windows CE is used as the CX8000 operating system. In the absence of a monitor port, the operating system and its “virtual” Beckhoff devices, TwinCAT software is used for system configuration and programming of the PLC functionality.

The CX8000 device family features an integrated, capacitive 1-second UPS, which in the event of a failure of the supply voltage, provides sufficient energy for saving remanent data. Important data can be preserved in a non-volatile manner without battery backup.

The CX8000 Embedded PC is exceptionally compact and, due to its low-power 32 bit ARM processor, consumes little energy. With its flexible fieldbus interfaces, EtherCAT connectivity and comprehensive range of PLC libraries via TwinCAT PLC, the CX8000 controller series represents a powerful and versatile new controller family.

 

TDS_ADV_Beckhoff_CX8000_3

Technical Data:

CPU: 400 MHz, ARM9, 32 bit
Flash: microSD card (1 GB, exchangeable, larger versions are also possible), 16 MB internal flash
RAM: 64 MB DDR2

Interfaces:

  • 1 x Ethernet interface for programming and general network connectivity
  • 1 x fieldbus slave
  • 1 x USB device (behind the front flap)

Real-time clock with battery (behind the front flap)
Integrated 1-second UPS
I/O interfaces for Bus Terminals or EtherCAT Terminals
Operating system: Microsoft Windows CE
Run-time: TwinCAT PLC (pre-installed)

Button_View-in-PDF

 

 
   

Brands

BECKHOFF | GE | HAKKO | MITSUBISHI | MSA
WEST | HMS | KEB
ADV_New-Feature_TDS-Map
ADV_New_TDS-Product-Guide-Catalog-2013

TDS_ADV_Beckhoff_Embedded-PC_CX8000
featured stories